人物經曆
學習經曆
2012-2016，新加坡國立大學，博士學位
2008-2012，浙江大學，學士學位
工作經曆
2020.1至今，哈爾濱工業大學（深圳），助理教授
2017.4-2019.12，美國賓州州立大學，博士後
2016.10-2017.4，新加坡國立大學，博士後
主要成就
科研成就
科研項目：
1.2020-2022，哈爾濱工業大學（深圳）新教師科研啟動項目，主持
2.2020-2022，深圳市海外高層次人才科研專項經費，主持
發明專利：
[1]吳洋; 王會; 孫捷; 傅盈西; 陳汐; 基于靜電紡絲與噴霧的3D打印制備功能梯度塗層的方法, 2014-09-29, 中國專利, CN201410514752.X.
[2]Fuh JYH, Sun J, Wu Y, Wang H, Chen X; Method for making Functionally Gradient Coatings by 3D Printing Based On Electrostatic Spinning and Electrostatic Spraying, 2020-10-13, US patent, US10800151B2
發表專著：
[3]Wu Y, Zhang Y, Yu Y, Ozbolat IT*. 2020. "3D Coaxial Bioprinting of Vasculature" in 3D Bioprinting. Springer.
[2]Peng W, Datta P, Wu Y, Dey M, Ayan B, Dababneh A, Ozbolat IT*. 2017. "Challenges in bio-fabrication of organoid cultures" in Cell biology and translational medicine, vol 3: stem cells, bio-materials and tissue engineering. Springer.
[1]Wu Y*, Han Y. 2017.“3D functional scaffolds for tendon tissue engineering”in Functional three-dimensional tissue engineering scaffolds: Technologies and applications. Elsevier.
發表論文：
[10]Wu Y*, Han Y, Wong YS, Fuh JYH. Fiber-based scaffolding techniques for tendon tissue engineering. Journal of tissue engineering and regenerative medicine. 2018. 12(7): 1798-1821 (IF=3.319, JCR二區)
[9]Hospodiuk M, Dey M, Ayan B, Sosnoski D, Moncal KK, Wu Y, Ozbolat IT*. Sprouting angiogenesis in engineered pseudo islets. Biofabrication. 2018. 10 (3), 035003 (IF=7.236, JCR一區)
[8]Wu Y*, Fuh JYH, Wong YS, Sun J. A Hybrid Electrospinning and Electrospraying 3D Printing for Tissue Engineered Scaffolds. Rapid Prototyping Journal. 2017. 23(6):1011-1019 (IF=2.346，JCR二區)
[7]Wu Y*, Wu Bin, Vijayavenkataraman S, Wong YS, Fuh JYH. Crimped fiber with controllable patterns fabricated via electrohydrodynamic jet printing. Materials & Design. 2017. 131:384-393 (IF=5.77, JCR一區)
[6]Wu Y, Wong YS, Fuh JYH*. Degradation behaviors of geometric cues and mechanical properties in a 3D scaffold for tendon repair. Journal of Biomedical Materials Research Part A. 2017. 105(4):1138-1149 (IF=3.221，JCR二區)
[5]Wu Y, Wang Z, Fuh JYH, Wong YS, Wang W, Thian ES*. Direct E-jet printing of three-dimensional fibrous scaffold for tendon tissue engineering. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2017. 105(3):616-627 (IF=2.674，JCR二區)
[4]Wu Y, Wang Z, Fuh JYH, Wong YS, Wang W, Thian ES*. Mechanically-enhanced three-dimensional scaffold with anisotropic morphology for tendon regeneration. Journal of Materials Science: Materials in Medicine. 2016. 27:115 (封面文章, IF= 2.448，JCR二區)
[3]Wu Y, Sriram G, Fawzy AS, Fuh JYH, Rosa V, Cao T, Wong YS*. Fabrication and Evaluation of Electrohydrodynamic Jet 3D Printed Polycaprolactone/Chitosan Cell Carriers using Human Embryonic Stem Cell-derived Fibroblasts. Journal of Biomaterials Applications. 2016. 31(2):181-192 (IF= 2.082，JCR二區)
[2]Wu Y*, Azmi DFB, Rosa V, Fawzy AS, Fuh JYH, Wong YS, Lu WF. Fabrication of Dentin-Like Scaffolds through Combined 3D Printing and Bio-Mineralisation. Cogent Engineering. 2016. 3(1), 1222777
[1]Wang H, Vijayavenkataraman S, Wu Y, Shu Z, Sun J, Fuh JYH*. Investigation of process parameters of electrohydrodynamic jetting for 3D printed PCL fibrous scaffolds with complex geometries. International Journal of Bioprinting. 2016. 2(1): 63–71.
人才培養
開設課程：生物3D打印技術研究。形成包括3D仿生醫用支架設計、制備和應用在内完整的研究體系。
社會任職
Bio-Design and Manufacturing (BDM)，副編輯，Springer Nature
BMC Biomedical Engineering，編委成員，Springer Nature
美國機械工程師協會 (ASME) 會員
Biofabrication, Acta Biomaterialia，Journal of Biomaterials Applications, Journal of Tissue Engineering and Regenerative Medicine, Rapid Prototyping Journal, Macromolecular Bioscience等期刊審稿人
